AIF12W300N-NTL

ARTESYN AIF12W300 SERIES 600 Watts Advanced Energy's Artesyn AIF series of high voltage DC-DC converters comprises six single output models offering voltages of 1.8 V, 3.3 V, 5.0 V, 12 V, 15 V or 24 V. Designed for use with power factor correction (PFC) modules, the converters accept a wide range input of 250 to 420 VDC. They have a 600 watt continuous power rating at baseplate temperatures from -20 to 100˚C and can start up from temperatures as low as -40˚C. The output voltage can be adjusted using an analog signal, external resistor or digital data – there is a built-in I2C interface. The output of the 1.8 V and 3.3 V converters can be adjusted from 50% to 110% of nominal, while the 5 V, 12 V, 15 V and 24 V converters can be adjusted from 80% to 120% of nominal. Overvoltage and overcurrent protection thresholds can also be set by analog or digital control. SPECIAL FEATURES ENVIRONMENTAL  600 W continuous power at 100 °C  Operating temperature: baseplate temperature 3  108 W/in (6.6 W/cm ) 250 to 420 VDC No. of Outputs Single -40°C to +100°C (Case temperature)  Positive and Negative enable function  Excellent transient response  Two year warranty Input Voltage  Storage temperature:  Low output ripple and noise sharing 600 Watts (48 V @ 12.5 Amps)  Start up temperature:  High efficiency - 90% typical  Paralleable with accurate current Total Power -20°C to +100°C (Case temperature) 3  OVP, OCP, V Adj control with ALP AT A GLANCE TM -40°C to +125°C  Overtemperature protection: 110°C max SAFETY  UL cUL 60950 Recognized  TUV EN62368-1  CE and UKCA Mark ©2022 Advanced Energy Industries, Inc. AIF12W300 ELECTRICAL SPECIFICATIONS Input Input Range 250 to 420 VDC Input Surge 500 VDC / 100 ms Efficiency 90% typical Output Load Regulation 400 mV typical down to no load Line Regulation 200 mV typical Noise / Ripple 480 mV typical Transient Response 5% max, deviation with 25% to 75% full load, slew = 1 A/uS Current Share Accuracy 3% typical, 5% max ( 3 80% of Io max) Overvoltage Protection 125% +/-5% Vo (nominal) - latch up Current Limit 105% 120% Io maximum - hiccup Short Circuit Protection 150% maximum - hiccup Control Voltage Adjust* 80 to 120% Vo linear programming Enable TTL compatible (positive & negative enable options) Current Limit Adjust 20 to 100% Io linear programming Clock Input (external sync) 3.3 to 5.5 Vp-p @ 800 KHz ± 10% Clock Output (internal clock) 4.5 Vp-p typical @ 800 KHz ± 5% Power Good Identification High (Vo) = power good Temperature Monitor Output 10 mV/°K (2.73 = 0 °C) Current Monitor Output 0 to 1 mA (1 mA = 100% Io rated) ± 0.1mA Over Voltage Protection Adjust 120 to 150% Vo Auxiliary power 1 2 V ± 1.5 V, 10 mA Isolation I/O 3000 VAC (20 mA) for 1 min I/B 2500 VAC O/B 500 VDC for 1 min 120% %V Onom +0.5V 100% 80% 250 VI 2 advancedenergy.com 305 420 AIF12W300 ORDERING INFORMATION Input Voltage Output Voltage Efficiency Model Number Notes 300 V 48 V @ 12.5 A 90% (Typ) AIF12W300 Positive Enable 300 V 48 V @ 12.5 A 90% (Typ) AIF12W300N Negative Enable MECHANICAL DRAWINGS Notes 1. Astec reserves the right to make changes to the information contained herein without notice and assumes no liability of its use and application. 2. -SENSE pin has to be connected to -Vo in parallel application, and is recommended to be connected to -Vo in stand alone application. advancedenergy.com 3 ABOUT ADVANCED ENERGY Advanced Energy (AE) has devoted more than three decades to perfecting power for its global customers. AE designs and manufactures highly engineered, precision power conversion, measurement and control solutions for mission-critical applications and processes. Our products enable customer innovation in complex applications for a wide range of industries including semiconductor equipment, industrial, manufacturing, telecommunications, data center computing, and medical. With deep applications know-how and responsive service and support across the globe, we build collaborative partnerships to meet rapid technological developments, propel growth for our customers, and innovate the future of power. For international contact information, visit advancedenergy.com. powersales@aei.com (Sales Support) productsupport.ep@aei.com (Technical Support) +1 888 412 7832 Specifications are subject to change without notice. Not responsible for errors or omissions. ©2022 Advanced Energy Industries, Inc. All rights reserved. Advanced Energy®, AE® and Artesyn™ are U.S. trademarks of Advanced Energy Industries, Inc. ENG-AIF12W300-235-01 2.18