HB04U15D12QC

HB04UC www.murata-ps.com 4.0W Unregulated High Isolation DC/DC Converter PRODUCT OVERVIEW The HB04UC Series is a low-cost, high-isolation voltage, unregulated, single and dual output DC/DC converter. The dielectric withstand characteristics of each converter is tested in production to ensure barrier integrity. The HB04UC Series uses advanced circuit design and packaging technology to realize superior reliability and performance. A 100kHz driven push-pull oscillator is used to ensure stable frequency and non-saturating operation of the input stage. This means there are no high peak voltages or currents like other design topologies, which can reduce unit reliability. Reduced parts count adds to the reliability of the HB04UC Series. FEATURES  RoHS compliant  High Isolation - 3000v Rating  8000v Isolation Test Voltage The high efficiency of the HB04UC Series means less internal power dissipation. With less heat to dissipate, the HB04UC Series can operate over a wider ambient temperature range with no degradation of reliable operation.  Barrier 100% Production Tested  Low Barrier Capacitance - 10pf  Low Leakage Current - 2ma Max The HB04UC Series offers the user low cost without sacrificing reliability. The use of surface mounted devices and manufacturing technologies make it possible to offer premium performance at low cost.  Internal Filtering Applications  Biomedical Data Acquisition  Industrial Process Control  Analytical Measurements  Ground Loop Elimination  Intrinsic Safety Systems MECHANICAL 0.400±0.010" (10.16) 1.00±0.015" (25.40±0.38) 0.015±0.005" (0.38) HBO4UC 0.040±.003" (1.02±0.08) 0.170" MIN (4.32) Notes: All dimensions are in inches (millimeters). 2.00±0.015" (50.80±0.38) GRID: 0.100 inches (2.54 millimeters) +VIN +VOUT PIN PLACEMENT TOLERANCE: ± 0.015" COMMON PIN: Not connected internally on single output models MARKED WITH: date code, job code. COMM -VIN -VOUT MATERIAL: Units are encapsulated in a low thermal resistance molding compound which has excellent chemical resistance, wide operating temperature range, and good electrical properties under high humidity environments. The encapsulant and outer shell of the unit have UL94V-0 ratings. Lead material is brass; lead finish is a 100-300 micro-inch layer of matte tin over a 40-80 micro-inch barrier layer of nickel. BOTTOM VIEW More product information and application notes are available on our website at www.murata-ps.com For full details go to www.murata-ps.com/rohs ISO9001 CERTIFIED www.murata-ps.com/support TDC_HB04UC.D02 Page 1 of 4 HB04UC 4.0W Unregulated High Isolation DC/DC Converter ELECTRICAL SPECIFICATIONS Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise noted. Model HB04U05S05QC HB04U05S12QC HB04U05S15QC HB04U12S05QC HB04U12S12QC* HB04U12S15QC HB04U15S05QC HB04U15S12QC HB04U15S15QC HB04U05D05QC HB04U05D12QC HB04U05D15QC HB04U12D05QC HB04U12D12QC HB04U12D15QC HB04U15D05QC HB04U15D12QC HB04U15D15QC Input Current Nominal Input Voltage (VDC) Rated Output Voltage (VDC) Rated Output Current (mA) No Load (mA) Rated Load (mA) 5 5 5 12 12 12 15 15 15 5 5 5 12 12 12 15 15 15 5 12 15 5 12 15 5 12 15 ±5 ±12 ±15 ±5 ±12 ±15 ±5 ±12 ±15 800 333 267 800 333 267 800 333 267 ±400 ±167 ±134 ±400 ±167 ±134 ±400 ±167 ±134 60 60 60 25 25 25 20 20 20 60 60 60 25 25 25 20 20 20 1000 1000 1000 380 380 380 310 310 310 944 944 944 375 375 375 300 300 300 Efficiency(%) 80 80 80 87 87 87 87 87 87 85 85 85 88 88 88 88 88 88 Notes: Other input to output voltage options may be available. Please consult factory. * ±6.25% Max for Voltage Setpoint Accuracy. www.murata-ps.com/support TDC_HB04UC.D02 Page 2 of 4 HB04UC 4.0W Unregulated High Isolation DC/DC Converter COMMON SPECIFICATIONS Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise noted. PARAMETER CONDITIONS INPUT Voltage Range MIN TYP MAX UNITS 4.5 10.8 13.5 5 12 15 351 5.5 13.2 16.5 VDC Reflected Ripple Current ISOLATION Rated Voltage Test Voltage Resistance Capacitance Leakage Current OUTPUT Rated Power Voltage Setpoint Accuracy Temperature Coefficient Ripple & Noise BW = 10Hz to 2MHz Line Regulation Load Regulation GENERAL Switching Frequency Package Weight MTTF per MIL-HDBK-217, Rev. E Ground Benign 60 Hz, 10 Seconds mAp-p 3000 8000 10 10 1.2 VISO= 240VAC, 60Hz 4 ±3 ±0.02 100 20 ±1.5 BW = DC to 10MHz High Line to Low Line See performance curves 2 ±5 100 22 Circuit Stress Method TA = +25°C TEMPERATURE Specification Operation Storage W % %/°C mVp-p mVrms %/% Vin kHz g 200,000 -25 -40 -40 VDC Vpk GΩ pF µArms Hr +70 +85 +110 °C °C °C 1. Reflected ripple current is measured at 50% load with a 33uF capacitor across the input of the UUT. THROUGH-HOLE SOLDERING INFORMATION These devices are intended for wave soldering or manual soldering. They are not intended to be subject to surface mount processes under any circumstances. The normal wave soldering process can be used with these devices where the device is subjected to a maximum wave temperature of 260°C for a period of no more than 10 seconds. Within this time and temperature range, the integrity of the device’s plastic body will not be compromised and internal temperatures within the converter will not exceed 175°C. Care should be taken to control manual soldering limits identical to that of wave soldering. www.murata-ps.com/support TDC_HB04UC.D02 Page 3 of 4 HB04UC 4.0W Unregulated High Isolation DC/DC Converter ORDERING INFORMATION ABSOLUTE MAXIMUM RATINGS HB04U xxyzz Q Internal Power Dissipation.....................................................................1W Short Circuit Duration................................................................Momentary Lead Temperature (soldering, 10 seconds max)..............................+300°C C Device Family HB04U Indicates DC/DC Converter Model Number Where: xx = Input Voltage y = Number or Outputs (Single "S", Dual "D") zz = Output Voltage Package Option RoHS Compliant TYPICAL PERFORMANCE CURVES VOUT VS LOAD (±5Vout Models) 7.5 7.0 7.0 6.5 6.5 VOUT VOUT VOUT VS LOAD (5Vout Models) 7.5 6.0 5.5 6.0 5.5 5.0 5.0 0 25 50 IOUT (%) 75 100 0 25 16 15 15 14 14 13 100 75 100 75 100 13 12 12 11 11 0 25 50 IOUT (%) 75 100 0 25 VOUT VS LOAD (15Vout Models) 50 IOUT (%) VOUT VS LOAD (±15Vout Models) 22.5 22.5 21.0 21.0 19.5 19.5 VOUT VOUT 75 VOUT VS LOAD (±12Vout Models) 16 VOUT VOUT VOUT VS LOAD (12Vout Models) 50 IOUT (%) 18.0 18.0 16.5 16.5 15.0 15.0 0 25 50 IOUT (%) 75 100 0 25 50 IOUT (%) EFFICIENCY VS LOAD Efficiency (%) 100 80 60 40 20 0 0 Murata Power Solutions, Inc. 129 Flanders Road, Westborough, MA 01581 U.S.A. ISO 9001 and 14001 REGISTERED 25 50 IOUT (%) 75 100 This product is subject to the following operating requirements and the Life and Safety Critical Application Sales Policy: Refer to: http://www.murata-ps.com/requirements/ Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifi cations are subject to change without notice. © 2018 Murata Power Solutions, Inc. www.murata-ps.com/support TDC_HB04UC.D02 Page 4 of 4